We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17856

6.1i NGDBuild LogiCORE PCI - "ERROR:NGDBUILD:752 - Line ### in UCF. Could not find instance(s) 'PCI_CORE/PCI_LC/... in the design..."


General Description:

The following type of error occurs in NGDBuild when I run the command line script to implement a Xilinx PCI Core:

"ERROR:NgdBuild:752 - Line 521 in '../../src/ucf/v300bg432_64_66.ucf': Could not find instance(s) PCI_CORE/PCI_LC/PCI-PAR/APERR_1' in the design. To suppress this error, specify the correct instance name or remove the constraint. The 'Ignore I\O constraints on Invalid Object Names' property can also be set ( -aul switch for command line users )"

The instance path in the error may vary.


These errors are generated when NGDBuild cannot find the netlist for the PCI core. The netlist for the PCI core is called "pci_lc_i.ngo".

This file is located in the following directory:


The XPCI directory must be sourced by the NGDBuild command line.

Command Line Example:

ngdbuild -sd ../../src/xpci

-sd ../synthesis

-uc ../../src/ucf/v300pq240_32_33.ucf


The best implementation method is described in the implementation guide, which is available in the <LOGICORE_PCI_INSTALL_DIR>/docs directory.

AR# 17856
日期 12/15/2012
状态 Active
Type 综合文章