UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18332

9.1i CPLD - "ERROR:Cpld:887" or "ERROR:Cpld:930- Cannot fit the design into this device"

描述

When running implementation of a CPLD design, I receive an error similar to the following:

"ERROR:Cpld:887 - Cannot fit the design into this device."

解决方案

This is a generic error message indicating a fitting failure, and it is always preceded by an error message indicating the cause of the failure. You might need to scroll up in the console window to view the error message (by default, the window is at the bottom of Project Navigator).

If there are no other error messages, see the CPLD Problem Solvers for more assistance at:

http://www.xilinx.com/support/troubleshoot/xtp016.pdf

Also, refer to (Xilinx XAPP444): "CPLD Fitting Tips and Tricks".

AR# 18332
日期 12/15/2012
状态 Active
Type 综合文章
的页面