UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19967

6.3 Data2MEM, iMPACT - An error appears in the status register; the CRC Error bit is NOT 0 for Virtex-4 devices

描述

General Description:

When I run Data2MEM on the command line, an incorrect ID code is written in the BIT file for all Virtex-4 devices. (Direct BIT file replacement of the BRAM contents is not supported for all Virtex-4 devices.)

解决方案

You can work around this issue as follows:

1. Add the BMM and ELF/MEM file to the ISE project.

2. Run Project -> Cleanup Project Files in ISE.

3. Run the Generate Programming File in ISE.

This will properly update the BIT file with the ELF/MEM contents.

AR# 19967
日期 12/15/2012
状态 Active
Type 综合文章
的页面