UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20026

LogiCORE SPI-4.2 (POS-PHY L4) v7.0 - "PAR ERROR:Place:120 - There were not enough sites to place all selected components"

描述

General Description

The SPI-4.2 Core v7.0 provides two clocking options: Global Clock and Regional Clock. When regional clocking is chosen, the core uses regional clock buffer resources.

When implementation is run for a design with "Regional Clocking" on an XC4VLX25-FF668 device, the place-and-route tool (PAR) reports following placement error:

"WARNING:Place:119 - Unable to find location. SLICEL component ---

------

The AREA group contains 896 possible sites for this component. 0 of these sites were available to place this component into.

ERROR:Place:120 - There were not enough sites to place all selected components."

解决方案

This issue is caused by the place and router of the ISE software.

Please install ISE6.3i Service Pack 2.

AR# 20026
日期 12/15/2012
状态 Active
Type 综合文章
的页面