UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21430

7.1 System Generator for DSP -- Why can I not use Fixed Point outputs with MATLAB R14.2, or why do I receive a "Fixed Point blockset not installed" error when setting my output Gateway to use the Simulink Fixed Point data type?

描述

Why can I not use Fixed Point outputs with MATLAB R14.2, or why do I receive a "Fixed Point blockset not installed" error when setting my output Gateway to use the Simulink Fixed Point data type?

解决方案

This is a result of a bug in System Generator that causes it to fail to detect the Fixed Point blockset in MATLAB R14.2.

To work around this problem, you must do the following:

1. Set the Gateway Out data type to double.

2. Connect the output of the Gateway Out to a data type conversion block from MATLAB.

3. Set the output type to the format that your need for your application.

AR# 21430
日期 12/15/2012
状态 Active
Type 综合文章
的页面