的页面

AR# 23390

12.1 EDK - How can I make my SDRAM controller visible in the Linker Script Generation GUI?

Description

I have generated my own SDRAM controller using PLB_IPIF. However, when I use the Generate Linker Script option in EDK, unlike memories such as PLB BRAM and OCM memory, my SDRAM does not appear in the pull-down selection. Therefore, I cannot allocate code sections to it.

What can I do to make my memory controller visible to the tool as a memory type?

解决方案

Use the following attributes in the MPD file:

PARAMETER c_baseaddr = 0xffffffff, DT = std_logic_vector, BUS = SOPB, CACHEABLE = TRUE, ADDR_TYPE = MEMORY
PARAMETER c_highaddr = 0x00000000, DT = std_logic_vector, BUS = SOPB

Refer to the "Defining Memory Size" section in the MPD chapter of the Platform Specification Format Reference Manual.

本答复记录是否对您有帮助？

AR# 23390
日期	12/15/2012
状态	Active
Type	综合文章

AR# 23390

12.1 EDK - How can I make my SDRAM controller visible in the Linker Script Generation GUI?

Description

解决方案

应用

产品

开发者专区

技术支持

关于 Xilinx