UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32261

LogiCORE Ethernet 1000BASE-X PCS/PMA or SGMII v9.1 - Updated setting for GTX OOBDETECT_THRESHOLD_0 attribute

Description

The GTX recommendation for the OOBDETECT_THRESHOLD_0 has changed since the 1000BASE-X PCS/PMA or SGMII v9.0 Core was released in the initial 10.1 IPUpdate. In 10.1.03, this will cause the tools to error out with the following message:

"ERROR:PhysDesignRules:1742 - Unsupported GTX_DUAL programming for comp <..>/gtx_dual_i. The OOBDETECT_THRESHOLD_0 general config data setting 001 is not supported. The allowed values for OOBDETECT_THRESHOLD_0 are 110 and 111. Please re-generate this component in the latest version of Coregen to fix this error. If the error persists, please open a case with Xilinx Technical Support to report this problem.

ERROR:PhysDesignRules:1742 - Unsupported GTX_DUAL programming for comp"

解决方案

To work around this issue:

1. The GTX wrapper files in the 1000BASE-X PCS/PMA or SGMII Core Example Design wrapper can be regenerated with the Virtex-5 GTX RocketIO Wizard v1.5. For more information on regenerating these files, see Chapter 7 of the 1000BASE-X PCS/PMA or SGMII.

2. The OOBDETECT_THRESHOLD_0 can be changed from "001" to "111" in example_design/transceiver/rocketio_wrapper_gtx_tile.v/vhd.

This will be resolved in the next release of the 1000BASE-X PCS/PMA or SGMII Core.

AR# 32261
创建日期 03/12/2009
Last Updated 12/15/2012
状态 Active
Type 综合文章