AR# 32917

SPI-4.2 v9.2 - Virtex-6 change to HIGH_PERFORMANCE_MODE attribute for IODELAYE1 elements in UCF

描述

The SPI-4.2 Core netlist generated by CORE Generator for Virtex-6 designs sets the HIGH_PERFORMANCE_MODE attribute on the IODELAYE1 elements to "TRUE". If targeting a performance of less than 700 Mbps, you can optionally change this attribute to "FALSE" in the UCF file. This will allow the IODELAY to consume less power.

解决方案

To implement this optional change, the following must be added to the UCF file with correct instance path for the particular design:

INST "pl4_snk_clk0/rdclk_idel" HIGH_PERFORMANCE_MODE = "FALSE" ;

INST "<sink_core_instance_name>/U0/io0/*dpa2/dpa_top0/*DATAPAIR*/MASTER_DELAY" HIGH_PERFORMANCE_MODE = "FALSE" ;

INST "<sink_core_instance_name>/U0/io0/*dpa2/dpa_top0/*DATAPAIR*/SLAVE_DELAY" HIGH_PERFORMANCE_MODE = "FALSE" ;

INST "<sink_core_instance_name>/U0/io0/*dpa2/dpa_top0/*CTLPAIR*/SLAVE_DELAY" HIGH_PERFORMANCE_MODE = "FALSE" ;

INST "<sink_core_instance_name>/U0/io0/*dpa2/dpa_top0/*CTLPAIR*/MASTER_DELAY" HIGH_PERFORMANCE_MODE = "FALSE " ;

Revision History

06/24/2009 - Initial Release

AR# 32917
日期 12/15/2012
状态 Active
Type 综合文章