UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45346

13.3 iMPACT - Virtex-7 - Indirect BPI Programming fails with "Core is not loaded"

描述

When attempting to do indirect BPI programming on a flash attached to my Virtex-7 device, iMPACT fails to program with the following messages in the console:

INFO:Cse - Status register values:
INFO:Cse - 0011 1111 0101 1110 0000 1000 0100 0000
INFO:Cse - '3': Completed downloading bit file to device.
INFO:Cse - '3': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time = 7 sec.
Core is not loaded.

The DONE pin has gone High, so it appears the core is actually loaded. What is the issue here and how do I work around it?

解决方案

This issue will occur when you have two or more devices in the JTAG chain in front of the Virtex-7 device with the attached flash.If you have the capability, youcanwork around this issue by modifying the JTAG chain, removing devices in front of the Virtex-7 device. If this is not possible, please contact Xilinx Technical Support andreference this article.

http://www.xilinx.com/support/clearexpress/websupport.htm

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
40503 13.x iMPACT - Known Issues for the iMPACT 13.x Software N/A N/A
AR# 45346
日期 12/15/2012
状态 Active
Type 综合文章
器件
  • Virtex-7
  • Virtex-7 HT
Tools
  • ISE Design Suite - 13.3
的页面