We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 45613

Xilinx Evaluation Kits - Digilent USB Cable installation requirements


Xilinx 7 Series kits, and beyond, use an onboard JTAG configuration solution from Digilent to enable configuration over USB. 

To successfully use this solution, a Digilent plug-in needs to be installed to connect with the board using Xilinx IDE Tools.


The Digilent plug-in can be downloaded from the following link:


For installation instructions, please follow the guidelines in the document provided in the downloaded files.  

This plug-in requires Adept systems 2.4 or later for Windows and Adept systems 2.3.9 or later for Linux.

Adept software is available in the following link:



AR# 45613
日期 02/24/2015
状态 Active
Type 综合文章
Boards & Kits
  • Kintex-7 FPGA KC705 Evaluation Kit