We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 47145

7 Series DCI - What are the supported values of the external reference resistors VRN and VRP?


There are three types of DCI:
  • Controlled Impedance Driver (Source Termination)
  • Controlled Impedance Driver with Half Impedance (Source Termination)
  • Split-Termination DCI (Thevenin Equivalent Termination to VCCO/2)

how should I select the value of the external reference resistors?


For the spilt termination and the DIV2 Controlled Impedance driver DCI the supported values for the VRN/VRP resistors are 80, 100 or 120 Ohms.

For the Non-DIV2 Controlled Impedance Driver DCI, the VRN/VRP resistors should be 40, 50 or 60 ohm.

The tolerance for the resistors are 1%.

AR# 47145
日期 10/13/2014
状态 Active
Type 综合文章
  • Virtex-7
  • Virtex-7 HT
  • Kintex-7