You are using a deprecated Browser. Internet Explorer is no longer supported by Xilinx.
14.x Zynq-7000 SoC Impact - QSPI programming on the ZC702 (7020 rev1.0 silicon) requires the board to be in QSPI mode
This is related to a Zynq-7000 errata. For reliable 14.x Impact QSPI programming with 7020 (1.0 silicon), set the mode to QSPI boot.
To work around this issue, set the mode pins to QSPI.
|Boards & Kits
- Zynq-7000 SoC ZC702 Evaluation Kit