AR# 52421


MIG 7 Series - Support for Vivado IP Upgrade


MIG 7 Series is currently not supported in the Vivado IP Upgrade flow; when attempting to upgrade a MIG 7 Series design, an error similar to the following is displayed:

import_ip -file /FILES/2012.3/ddr3_32bit.xci -name ddr3_32bit
ERROR: [IP_Flow 19-1670] Failed to copy local file "/FILES/2012.3/mig.prj' while importing IP 'ddr3_32bit'. This is a mandatory source file and must exist for import to be successful. Please ensure this file exists.
ERROR: [Common 17-39] 'import_ip' failed due to earlier errors.

MIG 7 Series IP is going to be supported in the IP Upgrade flow at a later release. In the meantime, this answer record details the flow for upgrading MIG 7 Series IP in the Vivado tools.


To upgrade a MIG 7 Series core, the "Verify Pin Changes and Update Design" flow within the MIG 7 Series tool must be used. This tool requires a "mig.prj" file from a previous MIG 7 Series generated core and a corresponding UCF file. Currently, this flow does not support uploading XDC files. For more information, see (Xilinx Answer 52419). After the mig.prj and UCF are uploaded, the tool verifies the pin-out and generates an updated MIG 7 Series IP core.
AR# 52421
日期 02/07/2013
状态 Active
Type 已知问题
People Also Viewed