UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 53393

iMPACT - Checksum read from SPI Flash does not match value in the .prm file

描述

When I read the checksum in iMPACT from an SPI Flash, it does not match the value listed in the .prm file.

Why is this?

解决方案

iMPACT uses a different algorithm for SPI Checksum calculation.

iMPACT will byte swap data before carrying out the byte addition.

PROM Generator does not do this.

iMPACT will consistently read the checksum, so a "Golden" version of the Checksum from a known good programming attempt can be used to compare iMPACT programming attempts.

Where programming is carried out by a non-Xilinx tool, the Checksum generated by the PROM Generator in the .prm file will be a better fit for comparison.

See (Xilinx Answer 18884) for details on how PROM Generator calculates a checksum and considerations when matching this checksum to one read from a device.

This issues is resolved in the Vivado Device Programmer 2014.3/2014.4.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47890 14.x iMPACT - Known Issues for the iMPACT 14.x tools N/A N/A
AR# 53393
日期 03/30/2015
状态 Active
Type 综合文章
器件
  • Spartan-6
Tools
  • ISE Design Suite - 11
  • ISE Design Suite - 12
  • ISE Design Suite - 13
  • ISE Design Suite - 14
的页面