Version Found: v1.8
Version Resolved: See (Xilinx Answer 45195)
The MIG 7 Series tool incorrectly shows the maximum frequency for the MT41K512M8THD-15E dual rank part as 667MHz. This is incorrect, the maximum supported frequency for this part is 533MHz.
While the MIG 7 Series incorrectly allows frequencies above 533MHz, you should ensure the core is not generated above 533MHz.
This issue will be resolved in the next release of MIG.
AR# 53910 | |
---|---|
日期 | 03/27/2013 |
状态 | Active |
Type | 已知问题 |
器件 | |
IP |