UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 54785

LogiCORE IP Tri-Mode Ethernet MAC v5.5 and earlier - IFG Adjust values that are smaller than 9 will result in TX IFG of 12 when core is generated with half duplex support

Description

The Tri-Mode Ethernet MAC Product Guide documents that the TX inter-frame gap (IFG) Adjust can go as low as 8 bytes when the core has been generated with half-duplex support, but half-duplex is not enabled. 

In the v5.x and v4.x Tri-Mode Ethernet MAC core, a value of 8 will result in a minimum IFG of 12 bytes out of the transmitter. 

An IFG Adjust value of 9 bytes can be used to set the minimum TX IFG to 9 bytes. 

This issue does not apply to cores generated with only full duplex support.

解决方案

In v6.0 of the Tri-Mode Ethernet MAC core, to be released in Vivado 2013.1, the TX IFG can now be successfully set to 8 bytes.

This is done using the IFG Adjust value when the core has half duplex disabled, but was generated with half duplex support included in the core.
AR# 54785
创建日期 03/06/2013
Last Updated 09/22/2014
状态 Active
Type 综合文章
IP
  • Tri-Mode Ethernet MAC