UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 55445

RXAUI v2.4, 7 Series - Required GTP/GTX and GTH transceiver updates

描述

If using RXAUI v2.4 in ISE 14.5 and earlier, there are several GT updates that are required:

1) Updates to GTP and GTH attributes, see (Xilinx Answer 52414).
2) Updates for production GTP transceiver reset logic, see (Xilinx Answer 53561).
3) TX buffer bypass on GTP/GTX and GTH transceivers, see (Xilinx Answer 55009).
4) GTP/GTH RX termination is set incorrectly to GND, see (Xilinx Answer 55840).

解决方案

If using Dune Networks RXAUI Mode, these updates have been made in the v2.4 rev1 core available in ISE Design Suite 14.6 and later. If you are using Marvel Networks Mode, please contact Xilinx Support.

The first two updates have been included in the v3.0 core released in Vivado Design Suite 2013.1, the third and fourth updates are in the v3.0 rev1 core included in Vivado Design Suite 2013.2.

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
47692 LogiCORE IP RXAUI - Release Notes and Known Issues for v2.x and earlier N/A N/A

相关答复记录

AR# 55445
日期 09/04/2013
状态 Active
Type 综合文章
IP
  • RXAUI
的页面