AR# 60570

7-Series Integrated Block for PCI Express v3.0(Rev2) - Example design Root Port model does not accept Non-Posted transactions

描述

Version Found: v3.0 (Rev2)
Version Resolved and other Known Issues: See (Xilinx Answer 54643)

When sending non-posted transactions to the example design Root Port model in simulation, the packets never arrive.

The Root Port seems to drop the packet.

解决方案

This is a known issue to be fixed in a future release of the core. 

To work around this issue in the current release, make the following modification in  project/pcie_7x_0_example/pcie_7x_0_example.srcs/sim_1/imports/pcie_7x_0/simulation/dsport/xilinx_pcie_2_1_rport.7x.v :

From:

.rx_np_ok       (~trn_rnp_ok_n),

.rx_np_req      (1'b0),

To:

.rx_np_ok       (1'b1),

.rx_np_req      (1'b1),

Note: "Version Found" refers to the version where the problem was first discovered. The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.


Revision History:
07/31/2014 - Initial Release 


AR# 60570
日期 07/31/2014
状态 Active
Type 综合文章
IP