UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 6350

VCS - "Error: undefined system task or function $sdf_annotate"

Description

General Description:

I receive the following error:

"Error: undefined system task or function $sdf_annotate ./pcim_top_routed.v 4513:

initial $sdf_annotate( "pcim_top_routed.sdf");"

NOTE: Optimal use of SDF ($sdf_annotate) requires a custom PLI table file. This file is specified using the -P switch, eg:

vcs myasic.v -P sdf_myasic.tab

An entry in the "sdf_myasic.tab" file for your design might look like:

$sdf_annotate call=sdf_annotate_call acc+=mp,prx:myasic+

where myasic is the top level module to be annotated. For details on specifying acc capabilites, see Ch4 and Ch5 of the VCS User's Guide.

Errors: 1"

解决方案

NGD2VER will write the following line to the timing simulation netlist:

initial $sdf_annotate("design.sdf");

$sdf_annotate is not a valid VCS system call.

Use the +compsdf VCS option to read in the SDF timing information. Please see (Xilinx Answer 6349) on how to use the +compsdf option.

AR# 6350
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章