UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 67563

Vivado 2016.2 - 10G/25G Ethernet Subsystem - Synthesis fails when one step mode is selected in BASE_R or if the transceiver in the example design is selected

描述

Designs using the 10G/25G Ethernet Subsystem with the transceiver in the example design can fail synthesis or encounter timing errors.

Designs featuring the10G/25G Ethernet Subsystem can fail OOC Synthesis when using BASE_R and one step timing mode, with the following errors:

[IP_Flow 19-167] Failed to deliver one or more file(s).
 [IP_Flow 19-3505] IP Generation error: Failed to generate IP 'xxv_ethernet_2'. Failed to generate 'Verilog Simulation' outputs:
 [IP_Flow 19-98] Generation of the IP CORE failed.
Failed to generate IP 'xxv_ethernet_2'. Failed to generate 'Verilog Simulation' outputs:
 [IP_Flow 19-1747] Failed to deliver file 'c:/Xilinx/Vivado/2016.2/data/ip/xilinx/xxv_ethernet_v1_3/ttcl/mac_baser_core_top.ttcl': can't read "C_PTP_OPERATION_MODE": no such variable

解决方案

These issues are fixed in Vivado 2016.3.

In Vivado 2016.2 you can install the patch attached to this Answer Record to resolve the issue.

附件

文件名 文件大小 File Type
AR67563_vivado_2016_2_rev1.zip 15 MB ZIP
AR# 67563
日期 08/25/2016
状态 Active
Type 综合文章
Tools
  • Vivado Design Suite
的页面