UMTS/3GPP TCC Encoder IP Offerings and Software Requirements

Hardware Evaluation Time Out Period * : ~ 8 hrs

SOFTWARE Requirements Table

LogiCORE™ Version Software Support Supported Device Families
UMTS/3GPP TCC Encoder v5.0 Vivado™ 2021.1 Versal™ ACAP
Kintex™ 7 UltraScale+™
Virtex™ 7 UltraScale+
Zynq™ 7000 UltraScale+
Kintex 7 UltraScale™
Virtex 7 UltraScale
Artix™ 7
Kintex 7
Virtex 7
Zynq 7000
UMTS/3GPP TCC Encoder v4.0 ISE™ 13.4 Virtex 6 LXT / SXT
Virtex 5 LX
Virtex 4 FX / SX / LX
Spartan™ 6 LX / LXT
Spartan 3A / 3 XA
Spartan 3E / 3
UMTS/3GPP TCC Encoder v3.1 ISE 10.1 Virtex II / II Pro

Download the required software from the AMD Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.