AXI4-Stream to Video Out LogiCORE IP Offerings and Software Requirements

  • Low Power devices or -L parts are not supported
  • Defense-grade or Q parts are not supported

SOFTWARE Requirements Table

LogiCORE™ Version AXI4 Support Software Support Supported Device Families
AXI4-Stream to Video Out v4.0 AXI4-Stream Vivado™ 2017.3 Kintex™ UltraScale+™
Virtex™ UltraScale+
Zynq™ UltraScale+
Kintex UltraScale™
Virtex UltraScale
Zynq 7000
Artix™ 7
Kintex 7
Virtex 7
AXI4-Stream to Video Out v2.01a AXI4-Stream ISE™ 14.3 Zynq 7000
Artix 7
Kintex 7
Virtex 7
Virtex 6 HXT / LXT / SXT
Spartan™ 6 LXT / LX

Download the required software from the AMD Downloads page. For information on New Features, Known Issues, and Patches please refer to the Licensing Solution Center.

* A Hardware Evaluation license for any of the IP cores above will enable you to parameterize, generate and instantiate these cores in your design. You will also be able to perform functional and timing simulation and generate a bitstream that you can use to download and configure your design in hardware.

The IP cores in this table will be fully functional in the programmed device for certain amount of time. After this time, the IP will "time out" (cease to function) and you will need to download and configure the FPGA again.